holley 350 and adaptor

[MiniCJJ64]

Where could I find a cheap holley 350 and adaptor for my 200? Also is the linkage easy to get working?

 

[Ba Mustang]

http://www.classicinlines.com/proddetai ... D200%2DHCA

That is the adaptor. Don't really know a place to get a cheap carb except Ebay.

 

[MiniCJJ64]

Thanks for the reply and that looks like it will work and its cheap!

 

[page62]

Do you have any auto swap meets in your area? 2-barrel carbs are usually easy to find cheap because so many people swap in 4-barrels.

 

[MiniCJJ64]

good thinking I will have to check if there is a auto swap meet

 

[AZstang66]

Or save up & buy a nice new one from summit.

 

[postal]

Would the above adapter work with a stock Ford 2v from a '65 289?

 

[page62]

Would the above adapter work with a stock Ford 2v from a '65 289?

It should. The Autolite 2100 is similar to the Holley 2V. You can read a little bit about it in the Falcon Six Performance Handbook if you have a copy...

 

[postal]

I think that I should get a copy.

Thanks,
TJ in GB

 

[BENJENBROOKS]

Would the above adapter work with a stock Ford 2v from a '65 289?

I used the autolite 2100 on my stock 200, but I was using an adapter from the local parts house, cost was under $20. I had the carb sitting around from my other 68 with a 302.

I had trouble with hood clearance, but was able to modify a cheap air cleaner to have a drop base with some .051 thk aluminum sheet and epoxy after cutting the air cleaner flange oversize.

 

[rditz]

I have a stock '66 289 with a 2bbl. will that be the right CFM for a 200??

it could use a rebuild, but would be cheaper than buying a new carb.

rod

 

[wtrmrk]

hey just finished the holley 2300 swap last night on my 65 econo 170. Its worth it the change in power is very noticable and way better drivability.
My glass bowl holley gonna set on the shelf for looks now.

 

[postal]

Which adapter did you use?

TJ in GB

 

[wtrmrk]

it was a transdapt #2044 pretty easy just had to get longer studs