K&N filter?!
- Thread starter MRJLB84D
- Start date
A
Anonymous
Guest
Whats the DIA of the carb?
and whats the max hight?
I will find one for you
P.S. do you want it round or oval?
and whats the max hight?
I will find one for you
P.S. do you want it round or oval?
A
Anonymous
Guest
GASSED260 What air filter can you do for my 34adm weber on the XFLOW? What size is best? I'm currently running a poxy ass small 7 inch long by 4.5" width filter... I've been told it'd restrict power is this true?
A
Anonymous
Guest
Or you can buy one of thoese cheap $30 air filter sets that come with all the mounting plates and stuff. (Which are 7-8 inches round bout1.5-2 thick). Throw away the filter and get a k&n one. They do make them 7-8 in cause i had one on my xf s-pac.
A
Anonymous
Guest
Where from? Does anyone in Canberra stock any decent size filters that arent a rip Dyno260?
A
Anonymous
Guest
Pick up this Mr. Gasket air filter: http://store.summitracing.com/default.a ... &x=17&y=10
And then pick up this K&N filter to go in it:
http://store.summitracing.com/default.a ... r&x=14&y=7
nine inch by two inch seams to be as small as they come.
And then pick up this K&N filter to go in it:
http://store.summitracing.com/default.a ... r&x=14&y=7
nine inch by two inch seams to be as small as they come.
i really wanted one of the k&n's that had the top plate part as a filter aswell if it makes sense? i know wat im on about 
gassed not sure of the dia on top of the std 2v carby sorry
EF: Or you can buy one of thoese cheap $30 air filter sets that come with all the mounting plates and stuff. (Which are 7-8 inches round bout1.5-2 thick). Throw away the filter and get a k&n one. They do make them 7-8 in cause i had one on my xf s-pac.
Where do i get the kits from??
:
gassed not sure of the dia on top of the std 2v carby sorry
EF: Or you can buy one of thoese cheap $30 air filter sets that come with all the mounting plates and stuff. (Which are 7-8 inches round bout1.5-2 thick). Throw away the filter and get a k&n one. They do make them 7-8 in cause i had one on my xf s-pac.
Where do i get the kits from??
:
A
Anonymous
Guest
K&N make filters for everything (even lawn mowers and compressors)
So im sure they would have somthing to suit your needs
Go here http://www.knfilters.com/ and have a look around
Get the part No of the filter you want then go to autobahn or whateve and get them to order it
So im sure they would have somthing to suit your needs
Go here http://www.knfilters.com/ and have a look around
Get the part No of the filter you want then go to autobahn or whateve and get them to order it
A
Anonymous
Guest
Yeah i bought them both from autobarn. But that is in Cairns not Canbera.
The cheaper filter set that I used had the top and bottom plates cromed and they looked pretty good but they still weren't k&n. Overall it still looked good and preformed great.
The cheaper filter set that I used had the top and bottom plates cromed and they looked pretty good but they still weren't k&n. Overall it still looked good and preformed great.
