Need a rebuild Kit

[red65stang]

Anyone know where i can get a rebuild kit for a 65 200ci? im getting black smoke from the breather on the valve cover and i figure its about time to tear her down. and what happend to the clifford performance website? anyone know?

 

[claptonfan]

clifford's site works ok for me. its http://www.cliffordperformance.net

 

[red65stang]

dang, for some reason when i tried going to it, it would bring up some other page saying that site did not exist.

 

[rbohm]

8) get a ford catalog from performance automotive warehouse. they have rebuild kits for the small six. ou can order online, but no online catalog.

www.pawengineparts.com

 

[AzCoupe]

let me know what parts you want in a kit, and I'll put one together for you with your choice of cam profile. very flexible too.

 

[simon]

I don´t tell you who to contact, but personally, I´d keep my hands off of the third-grade stuff rebuilt in Tijuana thats sold by PAW.

grief caused by faulty parts lasts longer than the initial happiness about the cheap price.

 

[rbohm]

I don´t tell you who to contact, but personally, I´d keep my hands off of the third-grade stuff rebuilt in Tijuana thats sold by PAW.

grief caused by faulty parts lasts longer than the initial happiness about the cheap price.

hmmm, so you consider manufacturers like edelbrock, trw, federal mogul, offnehauser, holley, perfect circle, seal power, etc. to be junk parts? PAW keeps its prices low due to volume business. all the machine work is done in house by PAW at their facilities in the los angeles area. PAW puts their kits together using what is on the shelf, unless you specify a specific brand. the parts PAW sells are good quality parts, so dont be fooled by the low price. PAW also has good customer service, not as good as mike, but better than alot of mail order places. by the way, brands like badger and triplex are american brands, just like trw, ross, venolia, etc.

 

[red65stang]

ok. anyone know what all im going to need as far a rings and gaskets. i have 60lbs of pressure in the first cylinder, inbetween 90 and 120 on 2,3,4 &5 and 30 on number 6. if i tear her down what all gaskets and i gonna need?