Need help with Duraspark II conversion

[mraley]

Hey All............I've got my 66 Stang in the shop having my Holley-Weber Carb, New 250 Head, and my new cam for FSPP installed. While there I decided to also switch out my old distributor for an updated Duraspark II system.

I've bought the module, distributor, Cap, Rotor, but my mechanic is asking about wiring to the module. I called the parts house and they said there not a kit available. The question is......How do you do the wiring? Is there a kit or a wiring harness available? HELP!!!!

Thanks...

 

[mcmillal]

Check out this link to the tech section of this forum.

http://fordsix.com/duraspark.htm

.........Cheers, Alex

 

[Anonymous]

Instead of robbing a wiring harness from another vehicle, I used a 4 wire trailer harness with the plugs on the end, just cut the round plugs off your dist. and module and wire the trailer plug onto the distributor,plug the long wiring into the stock duraspark module matching the colors comming from your distributor use the long harness to run your wire to the coil and a wire over to the ignition side of your starter solenoid and back to your module, I used the stock Duraspark module wiring digram from above except you do not have to use a ballast resistor. After wrapping it with loom it now looks stock.