new triple carb.200cui.

I just saw your thread about the 66 spindles what bushing did you have to make?change?I would like to get this kit for my 68.thanks
 
spikeomatic,i gonna try to explane,you must make a bush in the
machineshop,,the innerside must have thread measurrement
from the 66 balljoint,,and the outher side must have the measurrement
from the old 68 balljoint,so you can connect the steering linkage.
watch the photo's,i have used loctite,,maybe you can see the blue
color from the loctite,i hope you know what i mean.


these are the 66 baljoints.



leftside the 68 and rightside the 66 spindle watch the differend size of the wheel bearing.
jou can send a mail to SUMMIT and ask what you get,i can tell you its not include the spindles,
i have used an donorcar maybe you can get something from the wreckyard.

greetz,,JD.. :thumbup:
 
:beer: Sounds good I like it :thumbup: are you runing all the chokes instead of using only the center one? Looks like the Mustang has a very straight body. :nod:
 
Wow. As if this thread wasn't interesting enough already. It sounds really good at idle and responds well to the center carb. A real inspiration. And thanks for the heads up on the singer Amy MacDonald that you played with the slide show on youtube. She has lots of videos on Youtube. My favorite so far is http://www.youtube.com/watch?v=tS_fK5Yi ... re=related

I'll check back for hearing how it runs down the road.
Steve
 
bubba i get out all the 3 butterflyes (chokes)
and it is no problem to start the motor up.
thanks for the compliments,,,,
greetz,,JD,, :beer:
 
You did a beautiful job jdn21758.:thumbup:
The sound is awesome… and The video was great to. :thumbup: :thumbup:

What model Holleys are you using…
 
hello everybody,,first of all merry christmas and a happy
new year,,,so i am doing not much on the mustang at this
moment,,it is wintertime and cold in the garage,,,and i hate
cold,,,the next thing i gonna do is replace the balljoints,,
and make a new cabriohood the color is gonna be black
with a glass rear window,,when i got photo's i place them
on so you can see the results.

greetz,,JD,,,
 
thanks westcoastcomet,,i had 2 mustangs,,the cabrio this is never gonna by sold and i
have sold the other one before christhmas it was a benchseat from 1968 see the photo.

i have bought an moterhome back for this with a trailerhitch so i can have on hollydays,
and the carmeetings, i visit alway's with my wife, the whole summer enjoying from the
convertible,,,


youre dutch is clear enough,,,, :thumbup:

greeetttzzzz,,,,JD,,, :wink:
 
today i have renew de balljoints on both side,and after that
i made the first ride,excuse me for the sound, but with speakers
you can here the sound of the inline six better i hope.



and the link for the film from the first ride below:
http://www.youtube.com/watch?v=2E_kEiflNpg
so now you have an impression from the place where i live,
and the first ride of my six inline 1968,,,,,,

greetz,,JD,, :wink:
 
hello after a while now i have a problem, the foot.pack is
leaking fuel,,my question is what is the best material for
a new one,and is it possible to use something together
with the pack to make sure it is no more leaking,i hope
some one have a suggestion.

thanks guys,,,,greetz...JD. :mrgreen:
 
Hi JDN, the car looks and sounds great :beer: Much better than the red one :lol:

woodbutcher":35wxjpt0 said:
Love the video.Countryside is beautiful.
Click to expand...

I also enjoyed the touring videos :thumbup: 8)

jdn21758":35wxjpt0 said:
the foot.pack is leaking fuel
Click to expand...

I think this was lost in translation :wink: Great car! A new top will have it looking even better, great job!
 
You must log in or register to reply here.

Similar threads

bubba22349
  • Locked
All Small Six 1960 to 1967 Ford 144, 170, & 200 Six'es With a LOM, How to Install a better Distribitor
Replies
0
Views
13K
bubba22349
bubba22349
A
Vintage 3 Carb setup for Ford 200 engine
Replies
15
Views
7K
rwbrooks50
R
Back
Top