OHH MAN!!!

[Anonymous]

just got finished with the mustang. i guess a list of stuff i did would probably help.

T-5
DS2 Dizzy
MSD 6A
Electric Fan
Complete Rear Suspension

And OHH MAN what a difference

But I have a couple of questions

My Voltage Meter Bounces back and forth.
Do i need the vacum hose from the distributor to the carb?
When I stomp on it is the rear end supposed to get side ways?
How hot is the MSD box supposed to get?

And here is a list of things for the near future

Header and Exhaust
1" drop coils and new front suspension
Granda Front discs and Rear axle
2bbl holley 2300

What else should i do?
But i need some cash, anybody want to send me some

 

[Anonymous]

Good to see that the stang is comin along good. Im kinda in your shoes too. Ive got a job but no money. Freakin insurance is killin' me. Im paying like $130 a month. Ive got about half the stuff for my system. All I need is an amp for my subs($300) Dynamat for floor and trunk($300), amp wiring kit($60), kick panels($80), and speaker wire for the 6 1/12''s and 6''x9''s($15?). Its probably gonna take me another 3 months to get all that.

 

[TheDude]

Next, install dual exhaust and a 2bbl carburetor. You are going to be even more surprised!

 

[Anonymous]

Another Question:
With the MSD ignition when i turn the key off is it supposed to stay running for a few more seconds?
If not how do I fix that?

 

[MandarinaRacing]

This could be it....
http://www.msdignition.com/1troub1.htm#runon

Alex

 

[Anonymous]

Good to see that the stang is comin along good. Im kinda in your shoes too. Ive got a job but no money. Freakin insurance is killin' me. Im paying like $130 a month. Ive got about half the stuff for my system. All I need is an amp for my subs($300) Dynamat for floor and trunk($300), amp wiring kit($60), kick panels($80), and speaker wire for the 6 1/12''s and 6''x9''s($15?). Its probably gonna take me another 3 months to get all that.

hey man...dont buy dynomat. RIPOFF. not sure if a list was made in this forum...but in 2 other custom audio forums we came up with a good list of how to soundproof and on a budget...if u want i can PM u, or if others want I can make a small writeup with some other little audio tidbits.

 

[Asa]

i'm sure many would appreciate a good sound-proofing article

 

[66200i6]

The rear goes sideways?

Sounds like the next logical step is the breaks!

Good luck, Ric.