A question for everyone
How would you build the ultimate high performance 170 Falcon engine?
There are a few rules first though......
1. Can't exceed 3.0L or about 180 C.I.
2. Must use original '64 or earlier cylinder block casting
3. Must use original head casting
4. Head casting can be modified but welding addition material is not
i.e. big valves, machined, ported, etc but no welding stubs for carb mounts etc. Offy triple set up ok as they are cut/bore and bolt, no weld.
5. No forced induction, E.F.I., or electronic ignition.
6. Multi carb IS allowed (max 6 barrels)
7. Engine would be coupled with a 3 speed gearbox
Your thoughts..........
How would you build the ultimate high performance 170 Falcon engine?
There are a few rules first though......
1. Can't exceed 3.0L or about 180 C.I.
2. Must use original '64 or earlier cylinder block casting
3. Must use original head casting
4. Head casting can be modified but welding addition material is not
i.e. big valves, machined, ported, etc but no welding stubs for carb mounts etc. Offy triple set up ok as they are cut/bore and bolt, no weld.
5. No forced induction, E.F.I., or electronic ignition.
6. Multi carb IS allowed (max 6 barrels)
7. Engine would be coupled with a 3 speed gearbox
Your thoughts..........