where to buy a vacuum line

[az1966]

I need the vacuum line that comes off the back fire valve and runs over to the intake manifold

1966 200 ci motor wot smog

thanks for any help/ideas

 

[rbohm]

8) autokrafters, national parts depot, and virginia classic mustangs are but three suppliers that carry those very lines. i got mine from virginia classic mustang because they had them in stock at the time.

 

[az1966]

I went to all 3 sites with know luck, plenty of lines for v-8's and that go to the tranny or carb, but nothing for me. Again it goes from the backfire valve to the intake manifold. should I just try to make something?

Again thanks for help/info

 

[az1966]

the anti-backfire valve, again the line is approx 3/16" Dia. has a bushing? on one end that screws in the valve and then connects to a "mini" 2 port manifold via rubber tubing which is screwed into the main intake manifold
It's not the check valve, it's part of the emissons setup

 

[bubba22349]

You might be better off just making your own out some 3/16 brake line and use all your old fittings over

 

[az1966]

touch down !!!!!!! ACE hardware and AutoZone to the rescue,, Ace had the base fiting and AutoZone had a Brake line that will work like a champ

 

[bubba22349]