62Ranchero200
Famous Member
Greetings Ford Six Fans,
Somewhere on the forum I have previously seen a photo of a small six with a custom, three 2-V manifold - Holley (I think) or Autolite carbs, vertically oriented (completely separate from the Lynx/Australian/Weber trip manifolds).
Would appreciate any help to find this photo.
Thank you,
Bob
Somewhere on the forum I have previously seen a photo of a small six with a custom, three 2-V manifold - Holley (I think) or Autolite carbs, vertically oriented (completely separate from the Lynx/Australian/Weber trip manifolds).
Would appreciate any help to find this photo.
Thank you,
Bob
I really think the picture Bob is looking for doesn't have anything to do with mounting 3 X 2V carb's on the standard log heads. It's an intake that's made to fit on the 2V Australian heads or the C.I. / V.I. Aluminun heads. I also remember seeing this triple 2V Holley carb pattern intake he is asking about. Good luck 
Well from his post I don't think that DOCE, IDR, or any Austrailian triple Webers intakes are the direction he's wanting to go (not). Ok now if you actually read the OP's very first post (see above) you can see he's talking about a picture of a triple 2V intake with Holleys (2300) or Autolites that's going to fit the C.I. / V.I. Aluminum or a 2V head. Also hes was not interested in a Lynx or Weber triple intake. Plus if you happened to have ever looked at his engine build up in the past for his Ranchero he has the C.I. Aluminum head. Good luck 
