or weld'n cut like this guy.
rubbers look like spring shackle bushins...
U can pour ur own outta a can (2 part goop).
Again, 'late Mav oem". Ck above tech archive or "the Handbook"...
(No? pm 4 the other 1/2 doz "raise da hood" work-a-rounds). C below
email in my signature...
/OR/
Hello,
You mentioned you have several ways to increase hood clearance?
AVS
------------------
yes, 4 awhile I wuz the frd6 “holder of" such a list (altho a 'truck' rather than 'car' guy). The 60s/70s fords R known for this ‘problem’.
Lemmie C if I can re-develop:
1) suspension lift (yes, in some cases)
2) body lift
3) hood scoop
4) direct mount carb
5) remote air cleaner housing or carb hat & hose
6) late Mav towers and mounts
7) low rise carbs (RBS @ 215 cfm; 1100/1 @ ? cfm)
seems there were a copula more (2). All can B adapted w/in themselves as well (I'll use 1st half of #5) like the thread starter here (custom mounts'n towers). Several can B combined (also my need). Most R also performance mods as well...
Add to our list if U can,
- -Chad
BTW: like the vee middle initial. Gave my daughter 1 as well...