charliecurrie
Well-known member
66 200 - C4 - 1100 carb. Upgrading to Weber 32/36 and Duraspark II. After removing the 1100 and base plate with vacuum barb for PCV and replacing with 32/36 and base plate without a vacuum barb for PCV, where do I hookup the PCV hose? Can I replace the PVC with a breather - the ones that look like mini air cleaners?
So far, I've been told that I can hook it up to the same port that the C4 uses for the shift modulator. I've also been told that that is not a good idea. Would like to hear from those who have actually done this swap where the trans is an automatic and not a stick.
Thanks
My first post.
So far, I've been told that I can hook it up to the same port that the C4 uses for the shift modulator. I've also been told that that is not a good idea. Would like to hear from those who have actually done this swap where the trans is an automatic and not a stick.
Thanks
My first post.