I was in a rush to install the module in my Mallory unilite diz.one of the screws holding on the module fell..what I thought was down in the dizzy...so I took the diz.out...forgot to mark the rotor position...at top dead center..should the rotor point at number one cyl.
Remove the number 1 spark plug Put your finger or a piece of tissue paper over the number 1 hole as you turn the engine over, as its coming up on compression it will push it out. Good luck
Hi, Google a Ford 200 firing order diagram.
#1 is @ 5:00 o'clock position, pointing kind of at the master cylinder.
Pointing at the #1 spark plug is not right.
Good luck
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.