Unfalconbelievable
Well-known member
Having trouble with a microtech aftermarket ecu, http://www.microtechefi.com Ive got the LT10s hooked up and it runs fine, the injection and ignition lines are a bit shaky from 2000rpm up but it drives fine till 4500 then its almost like a rev limit. I've datalogged it with the microtech software and at that point everything drops out for 2 seconds and then returns, tps goes from 99% to 00% and back to 99% in no time and all the figures drop ie injection, ignition, load and rpm. I've checked the battery input, ignition input and earth continuity when it does it and they are all good. the only thing i can think of is a short in the ecu its self? I can email the graphs to anyone who wants, they'd just need to download the microtech software which is free from the site quoted above
Any ideas? Thanks
BTW its on a 4.0L multipoint six cyl.
Any ideas? Thanks
BTW its on a 4.0L multipoint six cyl.