Exhaust System

1966Mustang
1 min read
Views
11
Classic Inlines is a firm believer in using Jet-Hot ceramic coatings on our headers. While we offer painted headers, we highly recommend buying Jet-Hot Ceramic Coated headers, and our reasoning is very easy to understand. JetHot
1966Mustang
1 min read
Views
10
When selecting your exhaust kit, or components, it's critical to size them appropriately. Selecting a system that is to small, will restrict air flow at high rpm's and limit your top end power. Selecting a system that is to large, reduces back-pressure, which decreases low end torque. We...
1966Mustang
8 min read
Views
11,888
High-performance mufflers and exhaust systems are as much about looks and sound as they are about horsepower. Most people want mufflers and exhaust systems that look and sound as good as they perform. That's easily accomplished when the parts are new, but how about two or three years down the...
1966Mustang
2 min read
Views
12,502
Reaction score
1
It has been published that headers will not work with A/C, this is an incorrect statement. What is true... is that headers will work with either Stock or After Market A/C, but it is not a simple bolt on upgrade. Modifications are required to the compressor and/or alternator brackets to achieve...
  • Featured
1966Mustang
2 min read
Views
12,379
One of the most common problems with the small six is blown header gaskets and/or exhaust leaks. However they can be minimized by following proper installation procedures. The use of locking bolts may help, but even then, leaks can and will occur if you don't torque the header flange bolts (or...
1966Mustang
4 min read
Views
1,840
Do I really need a port divider? Will I get better performance or an increase in mileage? Will my exhaust system sound better with the port divider? Will a port divider help to prevent blown header gaskets? These are questions that have been asked and discussed many times on the fordsix forum...
Back
Top