300 carb on 250 head

[MPGmustang]

300 carb on 250 head with bolt on pedal and cable... all fron the junk yard

so I have 2 carter YFA 220cfm one does have smog everything the other smog nothing (Thanks 82F100!)
to get the carter to fit on the head I found a 250 carb spacer that had EGR crap on it, I've grinded it off, and will fill it with the JB-weld
the pedal and throttl cable I scored off a 90's grand marqui, has the snap on ball connection. not too sure about the pedal but I'll see once I'm into it.
found a f150 with a 300, snagged braket for the cable because it fitted the cable and I'll be able to run a bolt to lock it on.

the end goal would have me be able to bolt on and off either the autolite 1100 or the carter YFA, sadly when I would like too, I'll have change over my pedal and linkage every time, hopefully I'll think of a way...

thanks guys because of you there are plenty of searchable topic's here that have helped me out for cable gas pedal conversion, I just thought I' might share what I've found so far that might help others.

BTW the cable and pedal and cable braket was $13 today, half off thursdays

I'll hopefully post some picks when it's done.

 

[chad]

Rich-
mus B nice 2 lib where dair's nice junk yrds...
Lemmie no if U find an ol Carter RBS ('70 - '73/4/5 Mavericks & Comets)!

 

[CZLN6]

Howdy MPG:

Good get. I'll be interested to hear how this project goes. How the big YF will compare with an 1100. Keep us posted. COuld I ask you for a height measurement on the 300 YF? Just for comparison to smaller YFs and the RBS Carter. Thanks in advance.

Adios, David

 

[chad]

to get the carter to fit on the head I found a 250 carb spacer
Man, even higher, not 4 my app.

Why change back n forth between the 2 (yf/1100)? Or is it just a once-every-few-yrs thing?

 

[CobraSix]

Chad, I have a Carter RBS. I'll send you a PM.

 

[chad]

Chad, I have a Carter RBS. I'll send you a PM.

Juss caught it, thanks 4 da toss...