ACL parts for xflow

[MRJLB84D]

what sorta parts do ACL make for the xflow?

do they sell low comp, std and hig comp pistons?

bearings and what what else?

do they have a website i can buy from direct instead of going through an engine builder for the parts and getting charge huge markup's!

 

[addo]

ACL don't deal directly. Their parts are often cheaper than you may think. For example, ACL 250 mains are usually sold cheaper than Federal Mogul 250 mains.

Buying everything at once and making it clear you want a "no messing around" price will get the best deal. People who ring around and make vague or lame comments on being told a price, tend to irritate counter staff.

Piston/ring numbers (add "H" at end for file-fit ring sets):

6MKRY9410 - flat top with 250 rods
6MKRY9411 - 8cc dish with 250 rods
6MKRY9412 - 8.6cc dish with 200 rods
6MKRY9413 - flat top for speedway use with 200 rods

4C2856 - Cam bearings

7M2158 - Crank bearings

6B2150 - Rod bearings - add "H" for race sets and "HX" for extra clearance race sets.

Can't remember the gasket set codes.

 

[alloydave]

Addos got most of the numbers ,but heres a few more

6MKRY4105 15.3CC BOWL
6MKRY4104 22.OCC BOWL
CAM BEARING IS #4C5826 (sorry addo )
cast iron c/flow head set #CP630
cast iron c/flow bottom set # EP340
alloy head early 5/80-8/84 # DH100MT CARB
alloy head bottom set early #EP340 (2 PEICE ROPE REAR MAIN)
#EP341 (1 PEICE RUBBER SEAL 108MM)
#EP342 (1 PEICE RUBBER SEAL 110MM)

alloy head EFI 9/84-5/85 #DN160MT (RUBBER STEM SEALS)
5/85-88 #DN161MT (WHITE PUSH ON STEM SEALS)
alloy head carb #DH102MT (RUBBER STEM SEALS )

Some sets are available as a GTR full set with premium headgaskets and
manifold gaskets.

Dave

 

[MRJLB84D]

cool cheers boys!

where is the best supplier around? got parts places here in newcastle but their prices sometimes are a bit iffy!