Autolite 1100 Carb parts required with Autochoke

[Anonymous]

Hi
A small brass sleeve has broken off my carb Autochoke cam and I cannot find another. Pony Carbs will rebuild the entire carby (as they don't sell the individual part) and Im in Australia and the cost would be to much. If anyone has one laying around and it's complete please contact me.

 

[simon]

howdy,

Are you referring to the brass sleeve that goes inside the choke housing?

You can have that milled by any machinist, should be 10 minutes of work max.

If you mean the choke shaft and plate, I have a spare handy.