Boosted Project!

[Anonymous]

Hi all,

After reading all the posts about the turbo set up and talking to a few people about it i think that i'm goin got bite the bullet and go all the way with my 200 ci. First off i have a coulpe more questions:
1. What is a a good cam for the turbo application?
2. how much boost can i run on stock internals(rebuilt a yaers ago. around 5000 miles)
3. What size of carb(2bbl)

I have been looking on ebay and i have found a couple of options for my turbo:

Turbo Item # 290001809700 or 230002647179

Intercooler # 200001744076

Piping # 250001506820

These are just some of the kits that i found and was looking at. I'm still not sure to what turbo set up i'm going ot pick or company. Is ther anything else that i'm going to have to do to my engine to put the turbe on. I know there it going to be lots of hard work and late nights but thats ok for me i want more power out of my car. I can do all of the work myself or i have friends that know what to do if i have any questions. I'm going to automotive school right now so the mechanicl part is no problem for me to do. any help and abvice would be great.

Thanks

Ryan

 

[Anonymous]

1) stock cam works well.

2) I went to 26 psi on 150,000 mile stock internals.
Only broke parts when I got detonation, otherwise all was good.
"Does 10s" is into the 11's on cast pistons!!

3) If you are stupid enough to run a 1 bbl you might be able to run 103 MPH in the quarter (or even faster if you are using better parts than old trash like I was)