All Small Six Cam regrind

[ActionYobbo]

I have been reading cam info but it’s got me scratching my head. I have a new stock cam and I was going to send it for regrind. What do I ask for? What do I need?
I have a 200 with stock bore. A big log head which will be set up for a 350 Holley or a Webber. It will be pulling around a truck with a C4 auto. It will be my daily driver in good weather. In the near future it will get a turbo and aces efi. So basically all stock parts with a cam and efi and turbo.
I see edge machine has a 3/4 regrind for $70 but is that too big?
Thanks

 

[aussie7mains]

Stick to a stock grind. You will need all the low end torque you can get. 3/4 grind is too big. Turbo/supercharger doesnt need big cam to get the power you want.