Boosting the 4.0L OHC ECM???

[Unfalconbelievable]

OK i'll just get the dude down the road to do em, a little intoxicated at the moment lol, thgis is realy wierd, usualy im dancin tonite im on the computer

 

[Anonymous]

a little intoxicated at the moment lol, thgis is realy wierd,

'
Hahaha! "TWI" = typing while intoxicated!

 

[addo]

If that's "a little" - I'm worried about his idea of "a lot" of intoximacation.

Better to be typing than driving.

 

[Unfalconbelievable]

Yup sorry about that fellas, its that season i guess. Another question or 2 actualy. Is it a good idea to run a thermo behind the intercooler controled by a switch inside the vehicle? And my intercooler and piping are 3 inch dia. The turbo outlet on the compressor is 2 inch dia, is it ok to use a sillicone addaptor joint and switch straight to 3 inch as soon as the charge exits the turbo, or is it better to stagger it like go to 2.5 inch first or go to 3 inches at the intercooler?

 

[Anonymous]

d my intercooler and piping are 3 inch dia. The turbo outlet on the compressor is 2 inch dia, is it ok to use a sillicone addaptor joint and switch straight to 3 inch

It doesn't matter. I went from 2" to 2-1/2" via silicone adapter and 2.5 to 3 via welded cone.