Carb Adapter Measurements

[Anonymous]

Does anybody know the measurements for the adapter. I'd like to fabricate my own but can't nail the exact measurements. If any one can help me...ur replys are greatly appreciated.

What I need:

1. The distance between the bolts that would hoeld the stock carb.

2. The distance between the bolts that would hold a holley 350 2 bbl.

3. Bore size for the log head

4. Bore size for the Holley 350 2 bbl.

and last...

5. Height of the piece.

Also, is aluminum good for this piece, That's all I know how to work with If i can machine it right, I'll make a bunch. thanks alot guys

 

[Guest]

$15 from Stovebolt

http://www.stoveboltengineco.com/catalog/08-1015.htm

That would be my choice.

Al

 

[Anonymous]

i kinda want to make my own though. as a project for metal shop.

 

[Silver Shadow]

What we did here is to get a carb gasket for the stock carb. and one for the carb we are going to put on. then opened the hood and measured the hight thet we had to play mit. And because we had 2inchs of hight we made the adapter so thet the new carb will set mit the barlles side by side like theyt do on the V-8's. It came out beutifull. If I had a camera and awy to post pictures I'd show it to you.