I am presently in process of mountg 2 autolite 1.14 2100's on a flat top log head. Used Nirod to weld on both sides of flat areas,ground flat, and drilled w/1.5" holesaws. Centered the baseplates at each 3cyl division. This leaves original carb mtg. flange to install a divider of your choosing which I intend to experiment with. I used home-made mtg plates of1/2" aluminum. Still must work out alignment and linkage. This will be used on a 250 w280' cam,2800 converter,3.40 gear,short tires,lightweight Merk Bobcat. I don't get much time to work
on this projectyso time willl show result. Hope to keep you posted. ,
Gary
on this project, so time willl tell. Hope to keep you posted.