electric water pump

67chrrybucket

Well-known member
i had seen a picture of someone using the universal morso electric water pump kit to drive the WP I wanted to know if this was easy/hard what mods are involved on a 200/250 should i use the long snout water pump or short and if i could see some more pics :nod:
 
I have an electric water pump drive on my 170 in the T Roadster. Mine would be similar to the Mr Gasket version as it runs a small Gilmer belt drive. It also drives the original mechanical fan.
http://electricwaterpumpautomotive.blog ... -pump.html
7204333.jpg

You could also look at the inline hose type water pumps that come in the usual radiator hose size and heater hose size from Davies Craig.
http://www.daviescraig.com.au/Electric_ ... -list.aspx
 
I have it on My Race Only 250 , it is NOT recommended for continues street use , it worked very well for racing , the Moroso and Mr Gasket setups are almost Identical
 
The Davies Craig unit can be used continuosly and is designed for street use as ell as to back up a mechanical pump. They also have pumps that fit into the heater hose.
 
OK again , continuous use is say more than an hour or so ( i never have left it run for more than 20 min ) , its designed for DRAG RACING , there are continuous use pumps as posted above , but the Moroso / Mrg Deal is NOT for that . oh and still looking for that bracket
 
Back
Top