engine specs needed please

[Anonymous]

I got my first inline car yestersday it is a 1980 mustang hatch back.
I was wondering if any one could tell me what the bore, stroke, and compresson ratio was. Any information would be helpful thanks.

 

[80Stang]

http://falconperformance.sundog.net/facts.asp

You can check the basics from that table although it doesn't show 1980 on it.

 

[Hot 6t Falcon]

Your '80 Mustang Six will be a 200 cubic inch (3.3 liter)
3.3L 1V 6-cyl 91 hp manual trans B Code
3.3L 1V 6-cyl 94 hp auto trans B Code

Goto
http://bradbarnett.net/mustangs/timeline/79-86/80/index.htm

You can pretty much count on all 200's having the same bore, 3.68, and stroke, 3.13, and having an 8.0 to 1 compression.

Check out the web site in my signature
Good Luck

 

[Anonymous]

The information is what I was looking for. Thanks