I will hopefully Dyno my car next week. So, lets see if anyone can predict Rear Wheel HP. Remember my earlier numbers were 82hp (152 lbs. torque) with a log head (3 angle valve job), 1100 carb, stock cam, Pertronix Ignition, and MSD 6A.
My new setup is:
Aussie 2V Head w/port divider
4 angle valve job
shimmed springs
Adjustable Rockers, 1.5
9.6 compression
Holley 350
Dual-Pattern Cam, 260 Intake/270 Exhaust .420/.440 lift, 110 lobe
Dual Roller Timing Chain
6 Quart Oil Pan
Duraspark II Distributor, Flame Thrower Coil, MSD 6A, MSD Wires, NGK Plugs
Coated Single Out Headers, 2 1/4 exhaust, dual out muffler
C4 with Shift Kit
2.80 rear
Royal Purple 20/50 engine oil
Custom Made Ford Six Racing Sticker (Add another + 5hp )
My new setup is:
Aussie 2V Head w/port divider
4 angle valve job
shimmed springs
Adjustable Rockers, 1.5
9.6 compression
Holley 350
Dual-Pattern Cam, 260 Intake/270 Exhaust .420/.440 lift, 110 lobe
Dual Roller Timing Chain
6 Quart Oil Pan
Duraspark II Distributor, Flame Thrower Coil, MSD 6A, MSD Wires, NGK Plugs
Coated Single Out Headers, 2 1/4 exhaust, dual out muffler
C4 with Shift Kit
2.80 rear
Royal Purple 20/50 engine oil
Custom Made Ford Six Racing Sticker (Add another + 5hp )