has any body ever see or hear about this

[1967mustangman]

http://cgi.ebay.com/ebaymotors/64-6...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Has an body ever hear about or even try this exhaust out. Is it a good deal? and if you have a set up similar what will it sound like on a 1966 stock 200

 

[64 200 ranchero]

looks like a v8 setup

 

[1967mustangman]

I know it is a V8 set up i just thought if i could use a 90* bend on the drivers side then a piece of pipe from that piece of pipe to another 90* elbow and then a Y pipe.

 

[StrangeRanger]

I think you will find that a 2.25" dual is too large an exhaust system for a 200. The exhaust velocities will be so low that you may lose rather than gain performance

 

[MustangSix]

I used a similar system from Summit racing on the coupe. It worked ok. I would have preferred 2" tube, but the 2.25" was fine. Took some fiddling to get the tailpipes to hang properly. The trick is to start at the rear and work forward when you install it.