http://www.ebay.com/itm/Ford-Carb-Rat-R ... es&vxp=mtr, does this carb fit a 6?
holley 8 HA?
- Thread starter 64 200 ranchero
- Start date
Yes fits the old Flathead sixes
i cant find a 3rd holley 1904 from a ww2 jeep so i bought 3 of these holley 8 ha's to experiment with on my tripower, ill post pics, im going to try em without progressive linkage so they will all be on all the time
i just got my 8ha's they look like they will work with the linkage i built https://www.t-mobilepictures.com/myalbu ... 5622229893
It won't let you see the pictures without a log in.
Very nice 
So how does it run now?
i got one to run, but i still need to finish the linkage to get all 3, it sounds like a beast just off one 
Excellent 
i just bought what should be the last bit of parts to get all 3 going but i still have to have the carb mounts milled down so the carbs sit at the same level, my goal is to have all 3 open and close at the same time to even out the a/f mix through all 6 cyls
these carbs are very tall compared to the old 1101 i was running, it just clears the hood without a filter on it, so i will have to cut a hole in the hood and put a cowl induction, i was going to do that anyway but now i have to if i want to fit the filters, on another note i noticed that the car climbs hills without much effort now
well, i was running one of the carbs for a while then it started stalling, i switched it with another and it started leaking a little and had no adjustment on the idle mix screw, the third would stall every time i would come to a stop, then after i let it sit over night i found out it had a bad float because it was gushing fuel everywhere when i tried to start it, so i put the 2nd one back on since it is the only one that will run 
, i sent him a message on ebay to get a refund ,if i get the money back, ill get some webers
, i sent him a message on ebay to get a refund ,if i get the money back, ill get some webers
:wow: :arg: sorry you are having so much trouble
sorry you are having so much trouble
im going to fix these carbs and sell them, i found that one had a bad float, im going to buy some weber 34 ict's, ill need some help with jetting
