Holley reman carb's.

[pedal2themetal45]

Are the holley RBS Remanufactured carb anygood. $135.oo
I'm looking to get a better carb on my comet..
tim

 

[CZLN6]

Howdy:

The RBS was made by Carter. It was used by FoMoCo on 250 engines from 1970 to about 1977. It is rated at 215 cfm, has no SCV and is a quite simple, straight forward carb.

It was also used on a variety of AMC sixes in the '70s.

Adios, David

 

[pedal2themetal45]

Thanks David
I kind of knew that but what I realy wanted to know is weather the Holley reman's any good??
Tim

 

[LaGrasta]

my reman 1940/1946 (not sure of the difference) is great, no problems other than a flat spot now and then.

 

[CZLN6]

Howdy Back TIm:

Sorry I missed your point. I'm suspious of any rebuilt carb. In general., Holley is a good brand name. The risk is to put it on and try it as is. IF it is not ideal you will need to remove and dissassemble to determin what you have in the way of setting, cleanliness and gasket seal. You can do it now, or you may have to do it later.

It is my experience that rebuilt carbs are ready to run about 70% of the time.

Hope that is what you needed.

Adios, David