need trans id

[Anonymous]

did get for free a trans , but i cant figure out what it is ?
4 speed with shifterlinkage

nr that i did see onto the gearbox:T10b-1 wc.div t10h-7b


can some one give me some tips ? is this a mustang gearbox? wil it fit a 200ci ?

 

[MustangSix]

Does it look like this?

Or like this?

This is a Borg Warner T-10. The top one is the GM version; the bottom picture is the Ford type. The input shafts, mounting flange, and side cover are different.

Ford used this 4-spd for several years but eventually replaced them with T&C toploaders style.

 

[Anonymous]

i got the bottum one . so a ford type , wil it fit a 67 bel ore 66 belhouse for a six? i got 2 types belhouse here , 1 from a 2.77 [ alu ] and 1 for a 3.03 with adapterplare for the T5 setup [also alu ]

before i disamble the whole box from the car ,it would be nice to now if i could do a bolt on ?

 

[MustangSix]

The Ford type should bolt up to a 3.03 bellhousing. The transmission mount and the output shaft are the same too. Easy bolt on.

 

[Anonymous]

great thx , gone try it this week . wil i need the speed cable from an automatic ? because the connection is on the other site from the box

 

[MustangSix]

if the cable is long enough you should be able to plug it in, but the gear has a reverse rotation twist. 4-speed gears are differnt than the rest.

 

[mustang6]

Yes, be sure to change the gear to a reverse driven gear or you will munch the drive gear and they are near impossible to find for the T10s any more. BTDT

 

[Anonymous]

damn the belhouse didn ,t fit ????????????? got a c6 and c7 belhouse !

the log pattern is verry smal togehter . i wil make some pic tonight !