Thought I would share a few pics and info about the Aussie Hemi-6's I am into !
They are really not a Hemi, more like a poly or canted valve engine..but Mopar in Australia liked the Hemi name, so....
Here are some pics of the ported head I have. Stock valve sizes on them are 1.96/1.60 and this head uses a 2.00 intake and standard size exhaust. Flow is about 245 cfm on the intake at .600 (have to look up the exhaust flow, don't recall it off hand)
And here is the engine in the car... and yep, it's a Six-Pack ! They made around 302hp. in factory/stock form...not bad!
They are really not a Hemi, more like a poly or canted valve engine..but Mopar in Australia liked the Hemi name, so....
Here are some pics of the ported head I have. Stock valve sizes on them are 1.96/1.60 and this head uses a 2.00 intake and standard size exhaust. Flow is about 245 cfm on the intake at .600 (have to look up the exhaust flow, don't recall it off hand)
And here is the engine in the car... and yep, it's a Six-Pack ! They made around 302hp. in factory/stock form...not bad!