A
Anonymous
Guest
This might be a dumb question but I am by far NOT a turbo expert. I know the basics.. Anyway ok Ive got a subaru with a turbo that is banging and clanging so basicly motor is crap. Anyway I am thinking of taking off the turbo I believe its a T3 I am not for sure. Anyway... With the waste gate wired shut It was making about 12psi on a 1.8l flat 4. My question is If it can make 12psi with a 4cyl would this thing put out as much boost with a 300? and wouldn't it spool much faster because of the larger engine? I was looking at it and think a suck through turbo setup could be fabb'd fairly inexpensivly on my 76 carbd 300. Very cheap considering FREE turbo... Anyway any thoughts on this? I am probably mmistaken but I would think that a 300 would spool it much quicker because it has ALOT more exaust pressure. I am looking for awesome pulling power more than high rpm hp. I was thinking maybe running a motorcraft 2bbl and stock cam. Was kinda thinking it would make good boost at low RPMS but peter out at higher speeds..?? This would be ideal as I would probably run stock cam and 1bbl carb. I am thinking of awesome tourque in say 2000/3500range. Any thoughts on this would be appreceated. I've figured out most of the fabbing to hook it up, wouldn't cost me hardly anything with what I have laying around and what I can swipe off the dead subaru.
