triple carbing????

[Anonymous]

I know it is a long and extensive project, and frankly, i would need professional help, but how would you put a triple carb on your inline six???

 

[CobraSix]

Either direct mounting or use of a manifold adaptor like offenhauser:

and it requires cutting up the log head to make it work like this:

http://www.kastang.net/offenhausermod.html

Slade

 

[Anonymous]

it is possible to make the 2 holes in the log, and weld 2 of this carb spacers? :roll:

 

[Junk-Falcon]

i went

 

[Inline6Merc]

I just cut two holes in the intake and brazed two flanges on. It was cheap, simple, and easy.

Later,

Curtis

 

[Anonymous]

ONE more quick question, i know there is alot of options with different kinds of carbs, and different sizes, and the switch to the 68 or later distributer, but what size/kind, worked for yall? Please give me some examples of some carbs that work well, i am kind of new to the I6's and to cars in general. Please help me out and give some specific responses. Thanks to all yall that can help me.

 

[Anonymous]

Yayo, just drill and tap the log so that you can fasten the two adapters to the log. Then, just drill out the holes once you have the adapters were you want them placed. Very similiar proceedure to the Offy setup. But make sure you seal well between the two pieces.