Would someone please build tri-power intakes again!!

[ford_jake]

I was wishing we could get enough people that want one that maybe someone would manufacture these again. Any ideas or suggestions?

 

[64falconsix]

The offy 5970 for the 69 and later head is still being manufactured and is available from jegs $336.84 .

 

[vssman]

Check this place out... http://www.exeterautosupply.com/

 

[1bad6t]

Does anyone happen to know the adapter part number to make your own 3-1 setup?

 

[early ford fan]

acording to the falcon handbook some have had muffler shops weld on muffler flanges and used them.its a very useful book.id suggest to get a copy.

 

[bubba22349]

Does anyone happen to know the adapter part number to make your own 3-1 setup?

Don't remember the number fairly sure those were made by Offy. They may still be making them. Should not be that hard to make some up with a little welding.

 

[1bad6t]

I have the Falcon Handbook...just though it would be better/easier using the Offenhauser adapter than reinventing the wheel.

 

[FalconSedanDelivery]

Early Style http://www.summitracing.com/parts/OFY-5205/?rtype=10, and the later http://www.jegs.com/i/Offenhauser/750/5970/10002/-1

 

[1967JMG]

are we talking like the side draft ones for alum and oz heads or the offy or edelbrock type? i would go with the ones for my oz head if i could find any.