Patrick66
Famous Member
i've got a 3x1 setup with weber 34's, 1 ICH and 2 ICT's.
i set them up on the intake, and started the car. after about 20 seconds the area was very smokey, not oil or coolant, but gasoline. my wideband was reading 10.18 (max rich). I've removed the ICT's and just have the ICH in the center, the symptoms are the same. the ict's are new, but the ICH was an eBay find, i put a rebuild kit in it when i got it and i have stepped the jetting down from a 170 to a 155 main trying to lean out the mixture. I have checked the float level a dozen times and its set to weber's recommendations. I also have a fuel pressure regulator with a factory style pump set to 3 psi, i have tried 2.5 and 2 psi, nothing has worked.
any ideas or suggestions? the car is supposed to go the the body shop next week, so i really need to get it running, even if it is just on the one carb. thanks in advance.
i set them up on the intake, and started the car. after about 20 seconds the area was very smokey, not oil or coolant, but gasoline. my wideband was reading 10.18 (max rich). I've removed the ICT's and just have the ICH in the center, the symptoms are the same. the ict's are new, but the ICH was an eBay find, i put a rebuild kit in it when i got it and i have stepped the jetting down from a 170 to a 155 main trying to lean out the mixture. I have checked the float level a dozen times and its set to weber's recommendations. I also have a fuel pressure regulator with a factory style pump set to 3 psi, i have tried 2.5 and 2 psi, nothing has worked.
any ideas or suggestions? the car is supposed to go the the body shop next week, so i really need to get it running, even if it is just on the one carb. thanks in advance.