Click Here -> Please Consider Making a PayPal Contribution to the FordSix Forum!
2019 Contributors:
NJwpod, 1strodeo, mightynorseman, maxtrux, 6d7coupe, broncr, Phase3, 68Flareside240, bmbm40,
mustang6, WorldChampGramp, justintendo, BigBlue94, ags290, motorsickle1130, Rooster, ousooner919, ethanperry
rzcrisis, DoctorC, jamyers, Motorboy, fastpat, Silverback280, chad


<<< New Site Update >>>

200 Specs

Moderator: Mod Squad

User avatar
1strodeo
Registered User
Posts: 99
Joined: Mon Oct 17, 2016 11:09 am

200 Specs

Post #1 by 1strodeo » Thu Apr 13, 2017 11:25 am

Hi, anyone have a page or two out of a 66 Shop Manual with the engine specifications that they could share?

I had a 66 Shop Manual but gave it to the guy that bought my Mustang last summer. I have a 66 Bronco manual but of course the 200 was not an option for the Bronco at that time.

Mainly need acceptable cylinder bore sizes, crank journals etc so I can see if I can get away with just rings and bearings on this one I'm going to build.

thanks all,
Jeff

ags290
Registered User
Posts: 165
Joined: Tue Jun 23, 2015 5:09 pm
Location: Mansfield Texas

Re: 200 Specs

Post #2 by ags290 » Thu Apr 13, 2017 5:40 pm

Here is what I found online. I hope it helps.

Kevin
You do not have the required permissions to view the files attached to this post.
Kevin
Early 1965 Mustang with a 170

ags290
Registered User
Posts: 165
Joined: Tue Jun 23, 2015 5:09 pm
Location: Mansfield Texas

Re: 200 Specs

Post #3 by ags290 » Thu Apr 13, 2017 5:44 pm

And here are your bearings:
You do not have the required permissions to view the files attached to this post.
Kevin
Early 1965 Mustang with a 170

User avatar
1strodeo
Registered User
Posts: 99
Joined: Mon Oct 17, 2016 11:09 am

Re: 200 Specs

Post #4 by 1strodeo » Fri Apr 14, 2017 12:03 pm

Thanks Kevin, you must be a better googler than me :thumbup:

Who is online

Users browsing this forum: No registered users and 33 guests