Howdy guys,
With recent problems with my weber 32/36, I'm highly considering putting in an autolite 2100 since I plan to use that when i put my modified 1980 head on it.
My question is, they come in a wide variety, which is thr best to use on these engines?
A 1.01 comes off a 221 V8, so size is very similar
A 1.08 comes off most small block V8s, and this is the one I've heard is the best to use.
A 1.14 comes off 351s
Then the 1.21+ are big blocks
Would it be best to ise a 1.01 or 1.08? I'm looking for roughly same economy and slightly more power. But least work on jetting.
Thanks
Ryan
With recent problems with my weber 32/36, I'm highly considering putting in an autolite 2100 since I plan to use that when i put my modified 1980 head on it.
My question is, they come in a wide variety, which is thr best to use on these engines?
A 1.01 comes off a 221 V8, so size is very similar
A 1.08 comes off most small block V8s, and this is the one I've heard is the best to use.
A 1.14 comes off 351s
Then the 1.21+ are big blocks
Would it be best to ise a 1.01 or 1.08? I'm looking for roughly same economy and slightly more power. But least work on jetting.
Thanks
Ryan