250 flywheel?

[65andonly18]

Whats going to work the best with a 4spd toploader, i know it fits a 289 but isnt the balance off? Thanks.

 

[JT81stang]

Yes, the balance must be zero.
I have an early 302 flywheel for my 250 but I have to get it zero balanced.
I've heard some say that a 300 flywheel will work.

John

 

[rbohm]

8) here are 7 flywheels that will work just fine for you. they are all zero balanced.

http://store.summitracing.com/egnsearch ... 4294871921

 

[65andonly18]

Thanks i found some on mustangs unlimited as well, so as long as they are 0 balance then they should work..

 

[powerband]

Yes, the balance must be zero.
I have an early 302 flywheel for my 250 but I have to get it zero balanced.
I've heard some say that a 300 flywheel will work.

John

I used a CAT performance lightweight FW off E-Bad' for @ $ 75. It is presumed you are using a 157 Tooth. Most (all ?) 300 FW's are 164 Tooth. Starter choices and alignment need to work. Most (all?) 250's used 157 Tooth as far as I've read.

Powerband

 

[yodabiri]

WOW the summit selection looks a bit pricey! I got a neutral balance billet steel flywheel on ebay for $90 with shipping a while back. I dont know if that company still carries it though, cuz i checked back with them and they only had 28oz's and 50oz's, but no neutral. Im sure if you ask they probably have some though. Just do a search for ford flywheels on ebay and you should be able to find them.

Hope this helps.