Auto lite 1100 Venturi size

[adamscm]

Hello All, I've read that the 1100 came in 3 Venturi sizes over the years. How does one go about measuring the venturi size? Where exactly do you measure, and if it's at the most narrow part of the opening, how do you get in there to measure? Thanks

 

[B RON CO]

Hi, an inside caliper is used for this measurement.

 

[adamscm]

That's what I figured, of course I don't have one.

 

[drag-200stang]

Make a go no go cage. Take a coat hanger cut it up bend a L at one end ,trim L until it just fits and measure with regular tools. May have to form it some and go from base side.

 

[tom_66]

I believe non-SCV 1100s have 1.10" venturi.

 

[adamscm]

Mine is a SCV that had been used on a '63 170. I'm trying to find one that would best suit my '65 200.

 

[hotroady]

65 mustang 200 scv came with 1.20 venturi.

 

[chad]

65 mustang 200 scv came with 1.20 venturi.

Adam,
U can buy the jets on the net.
Look up under that carb. I'll do a search -
(thinkin Mike's, Datona, humm, er, ah….)
Back later. Pic to C where to remove/install:

charlesfuller/Desktop/autolite_1100_jet.JPG

 

[CZLN6]

Howdy All

FYI a '65 200 came with a 185 cfm rating and a 1.2" inner diameter. 170s have a 1.1" inner Dia. and a 156 cfm rating.

"Best suited"? what distributor are you going to use?

Adios, David