DS II Swap

  • Thread starter Thread starter Anonymous
  • Start date Start date
A

Anonymous

Guest
Got the DSII upgrade installed this past weekend in my 73 Maverick 2 door with a 250/C4. Running it through a GM module with a 30 amp relay for the 12 volt source. RUNS GREAT!! Really woke up the 250! Just wanted to thank everybody for all the How-To info.
Got the DSII upgrade installed this past weekend on my 73 Maverick 2 door with a 250/C4. Running it through a GM module with a 30 amp relay for 12 volt source. RUNS GREAT!! Really woke up that 250. Just wanted to thank everybody for all the How-To info! Special thanx to CrashBob for the Pics. and to Mike at Classic Inlines for wiring diagram for relay! Great website! This is my first Post. Thanks again everybody and to Joshyx for his help with the install.
 
Well I must say that this is a pretty cheap and easy upgrade...Took my dad(watertrucker) and I about 3-4 hours to get everything all hooked up...The hardest part was putting the dizzy back in (required a lot of patience :bang: ) We also upgraded the stock coil to an accel superstock coil...Now we just gotta regap the plugs and we'll be good to go...I'll try and get some pics up later...


Dont give my dad to hard of a time for doubleposting on his first post :D
 
watertrucker":2b1j9xqr said:
Just wanted to thank everybody for all the How-To info! Special thanx to CrashBob for the Pics. and to Mike at Classic Inlines for wiring diagram for relay! Great website! This is my first Post. Thanks again everybody and to Joshyx for his help with the install.

You are welcome! It feels good to be able to help someone else, especially after all the help I received on this forum. Great people you'll find here.

CrashBob
 
here are the pics and the car that got woken up :D
73mav003.jpg


73mav018.jpg


73mav017.jpg


73mav016.jpg


73mav015.jpg


73mav014.jpg

73mav013.jpg


73mav012.jpg


73mav011.jpg


73mav010.jpg


73mav009.jpg


73mav006.jpg
 
and no, the wiring isn't going to stay like that...it still needs to be cleaned up...it's just temporary
 
fordconvert":2rnfmb1w said:
Looks good :thumbup:

The Accel sticker adds 1,000 volts and 15 horses all by itself. Maybe even more if its over a hole!

can you imagine what would happen if we put 2 stickers :shock: :hmmm: :D
 
Back
Top