Extra parts in gasket set? Maybe some missing?

[fordconvert]

Im just getting ready to put my 200 back together and was starting to figure out how many things I lost since I took it apart. I was looking at the FelPro full gasket set and noticed a 3 parts I dont remember removing.

The one on the right is metal and is slightly dished.
Middle one is nylon
Left one looks like its for an oil filter??

Is there something that goes between the oil pump and the block?

Should have took better notes, I should have known I was not going to put it back together the next day.

 

[Junk-Falcon]

the

 

[mach1 mark]

Ya the white one is for the oil drain bolt.

However I know what you can do with the big rubber one, read carfully!!

You put rubber gasket at the edge of your finger, between the finger and the nail. Then pull the rubber gasket really hard in a reward motion. Pull it back to about your rist. Aim the end of your finger torwards a large trash can and let go. You will be amazed with the relief you gain from this procedure.

Sorry, I could'nt help myself. most gasket packs have more than you need.

 

[addo]

The metal one - not for the distributor, is it?

 

[fordconvert]

The metal one is not a wave washer like may be used for end play on a shaft it is cupped. The plastic one may fit the oil plug, I will have to check. You would think a large companythat has been around foever and has 75% of the market like Fel-Pro would have a decent website that described stuff better.

Is there supposed to be something between the oil pump and the block?

 

[Mercury Mike]

The large one is for the fuel filter. Goes between the canister and the pump for in-pump filter equipped cars. =D

 

[simon]

Is there supposed to be something between the oil pump and the block?

Yup - a small, unimpressing paper gasket.

 

[fordconvert]

Cool. I can handle one random part, 3 was going to bug me.