The throttle linkage and kickdown rod on early 69-70 Ford small sixes with the 250 carb before the RBS had the 9728 bracket as a throttle bracket.
When EGR was introduced, the whole actuation changed, but the part continuted to be mounted to the same two bolts at the rear exhaust manifold plane of the head.
Note the following
I'm certain there are high resolution pictures of bracket BPN
9728.
Just can't find em.
1969-1983 200/3.3 or 1969-1980 250/4.1 is whacha whacha whachawant...
Every C9 onwards head till E0 had the two bolt hole boss cast into the back part of the head, some early ones weren't drilled.
from
http://www.fomoco.org/tech-tips/how-to- ... t-numbers/
BPN
9500-9599 is the Carburetor
9700-9999 = Accelerator and choke control rods
As of the advent of the C5 and AOD, it went to a cable linkage on the YFA Big Sixes, but the er 1969-1970-1/2 Falcon, 69-73 250 Mustang, 69-77 Comete/Maverick/1975-1983 Granada/1975-1980 Monarch/1979-1982 Mustang/Capri/ 1978-1983 Fairmont/Zephyr all used a rod oprated version.
The internal BPN number will most likely be #9728
the 6 cylinder 240/300 F-Truck and E-Van system.
It should be under the Ford Six Performace old Classic in lines tech articles
Its not under 1bad6t.coms 170/200/250 69-77 Maverick rod operated kickdown linkages.
They were under this link
03-12-2012, 03:26 PM #1 by
pd59
https://www.ford-trucks.com/forums/1146 ... s-etc.html
Both the Big Six and Small six rod operated kickdown bracket were similar, but not 100% the same.
The #9728 C4 and C5 kickdown rod bracket on the 1978 to 1985 non feedback carb F100/150'S has a similar musroom on the rod as the stock Small Six 1969-1983 rod operated kickdown.
Gary's Garagemahal (the Bullnose bible) is still active.
http://www.garysgaragemahal.com/kickdown-linkage.html
7A185 Rod operated for Duraspark equiped Feedback MCU and non feedback non computerised 4.9 liter truck and Van YFA Carter
for FMX/C6/C5/C4 on the 4.9 big six.
"http://www.garysgaragemahal.com/uploads/6/5/8/7/65879365/300-six-linkage-illustration_orig.jpg"
The 1983-1986 cable operated bracket is #9728, and near the 57632-S (U-10-A) picture for later TFi equiped EECOV 4.9 liter truck and Van YFA Carter, for AOD 4speed autos.
"http://www.garysgaragemahal.com/uploads/6/5/8/7/65879365/aot-300-six-linkage_orig.jpg"