brianproctorla
Well-known member
I am in need of some help.
I am wrapping up a 250-2v swap for a 65 mustang i6 with 200 engine. I have it buttoned up, it turns over and has spark. I checked the compression in the first two plugs and got 90 pounds. I think my rods (from the 200) are too short. I used the pedestal from the 250-2v. How can I troubleshoot this?
Thanks
Brian
I am wrapping up a 250-2v swap for a 65 mustang i6 with 200 engine. I have it buttoned up, it turns over and has spark. I checked the compression in the first two plugs and got 90 pounds. I think my rods (from the 200) are too short. I used the pedestal from the 250-2v. How can I troubleshoot this?
Thanks
Brian