HEADS

[Anonymous]

well i got a call from my machine shop and that bolt did alot more damage to the head thenjust cracking a valve and he according to the machine shop while its apart i should bring the head up to date. i have a 250 head off of a 1969 ford mustang that i am wondering if it will bolt up to my 1967 ford 200 block, perhaps give me a litttle more power sence i have to build up a head any ways, and if i put a holley 2300 on it will i still have hood clearance on the falcon. Also what type of performance would or could i expect from my 200 witha 250 head if it will bolt up i am priity sure it will but i want to check with you guys first



wes

 

[80Stang]

Yes, it will bolt right up as it literally is the same head as used with the 200. If you already had a Holley 2V in place things won't change in means of hood clearance.

No, it probably won't produce noticeably more power

But yes, it probably is flattopped head and it is easy to mill the top of the intake to accept direct 2V adapter or triple 1Vs...