Just got my cliffy kit, questions

[Anonymous]

Ok i just got my weber 32/36 kit from weber and i have a few questions about the set up. I noticed there is a threaded whole in the adapter plate.... what exactly do i but in there. Its it in side, not the top or bottom where it connects to the manifold and carb...(i'm not that stupid). So anyway, i got the kit with regulator, carb, linkage, and all... i was wondering if anyone knows what plumbing i need to finish the job. I don't want to start anythign till i get all the pieces and this seems to be the one thing i am missing. Lastly, where do i find tuning specifications for this carb or can someone tell me where to start.

 

[Anonymous]

hi

i just got my 200ci '66 mustang running with the clifford 32/36 adaptor. after a year of work i got to drive her!

so the threaded hole is a 3/8inch pipe thread (i think 3/8 but check in case). you need to put a fitting in there so you can attach a hose to run to the PCV valve that goes on the rear part of the vavle cover.

check out this site :

http://www.racetep.com/webtechpage.html

the racetep.com has some other info on it too.

-evren