New Aluminum Cylinder head

[SteveStang]

I was just reading the deposit structure for the new aluminum head but cannot find anywhere where it states the price for one of these.
All I see is what a $1000 deposit does for you.
Anyone really know?

SteveStang

 

[fphillips]

It's $1350 including valves. You may also want to get the stud kit and new springs, etc.

http://classicinlines.com/proddetail.as ... D200%2DACH

 

[Funky Cricket]

Mike,

I know you've done a ton of work already...

but...

anyway we could see "stage" packages for the head.
sets of rockers, cams, intake, with HP thresholds? The pricing is very good.
You ARE the man. Thank you again.

 

[AzCoupe]

Were working on packages, but need to do some dyno testing with the various parts first. We have two motors being built right now, which should be done next week. Both will be used for the dyno test, in various forms of buildup, from stock all the way up to radical. Were going to start with a stock motor to get a baseline, then swap just the head to see what types of gains are possible. Then we will go back to the log head and beging swaping various parts for each run. Lots of work, and lots of dyno time, but we'll get there.

 

[FLSHBCK]

Both will be used for the dyno test, in various forms of buildup, from stock all the way up to radical. Were going to start with a stock motor to get a baseline, then swap just the head to see what types of gains are possible. Then we will go back to the log head and beging swaping various parts for each run.

This is the stuff I'm interested to see...

keep up to good work!

 

[shmoozo]

Were working on packages, but need to do some dyno testing with the various parts first. We have two motors being built right now, which should be done next week. Both will be used for the dyno test, in various forms of buildup, from stock all the way up to radical. Were going to start with a stock motor to get a baseline, then swap just the head to see what types of gains are possible. Then we will go back to the log head and beging swaping various parts for each run. Lots of work, and lots of dyno time, but we'll get there.

I can't wait to see the results.

 

[ASMART]

A lot of work but just the kind of work I would liove to do!

 

[Funky Cricket]

just to say it again.

you are the MAN!!!

I am fairly knowledgable when it comes to cars, but just looking at the package selections on the web site got my head a spinning, with the rocker and cam combo's alone.

looking good though. I am very excited and can't wait to get another 6.