Nitrous on a 200 cid engine

[Crosley]

I found a 2 barrel Holley type nitrous plate.

With cast pistons , I plan on hitting the engine with only the 50 hp setup.

What would be a total timing advance figure to start with on the nitrous?

I run around 34 - 36 total timing on the engine now , no nitrous

 

[rbohm]

8) with the small amount of chemical supercharging you are going to use, the timing settings you have now will do fine. just remember that you dont want to inject the nitrous until the engine is at about 2500 rpm.