bubba22349":31w0r2fb said:good catch drag-200stang, yep it's missing the wedding ring (cam spacer ring) too.
Bubba 22349 can you possibly get echo's vid links in a locked sticky at the top of this section, with an appropriate header :idea:bubba22349":29xtmw38 said:There is only one spacer ring! In the below video link by site member "echo1955" you can see all the parts labeled at the 8:50 to 9:10 mark in the video. This also shows the correct installation of the parts too. https://m.youtube.com/watch?v=gg_VFXm827w
This next video shows how to install of the timing chain set at 0:0 to 4:18. https://m.youtube.com/watch?v=bbUeLAp6XaI
This last video will show you how to Degree the Camshaft if you would like. https://m.youtube.com/watch?v=zj-GA494SJQ
Good luck
bubba22349":3hby73bg said:There is only one spacer ring! In the below video link by site member "echo1955" you can see all the parts labeled at the 8:50 to 9:10 mark in the video. This also shows the correct installation of the parts too. https://m.youtube.com/watch?v=gg_VFXm827w
This next video shows how to install of the timing chain set at 0:0 to 4:18. https://m.youtube.com/watch?v=bbUeLAp6XaI
This last video will show you how to Degree the Camshaft if you would like. https://m.youtube.com/watch?v=zj-GA494SJQ
Good luck
Good point. However if Bubba posts it you can take it to the bank.chad":mpo75o73 said:if you see a vid on there and R not sure abt it check-in here.
We have 'members' who've placed lots there and can confirm correctness of
the procedures U C there, provide intros to who posted if requested...
Thanks Hope new builders will take the time to watch the vids. and protect their investment.bubba22349":2g1vks9r said:As requested I have made a post (and it's now a sticky at the top of the small six forum) with links to all of "echo1955" videos showing his mild performance 200 engine rebuild form start to finish. Check it out (see the below link) his videos cover all most everything on how to build a Small Ford Six correctly the first time! Good luck
viewtopic.php?f=1&t=77528
wsa111":11tn4tds said:Spacer for Camshaft & Timing Gear. All you machinists here it is.
There is no hole pattern, the highlighter marks are to highlight the chamfer on the inside at least that what I call it...It is there to clear the machining of the snout so it does not sit uneven . If you look at your pic of the missing plug you can see it.schaferstephen":2lf7sl5o said:wsa111":2lf7sl5o said:Spacer for Camshaft & Timing Gear. All you machinists here it is.
I sent this to my machinist, and he asked me if I had any measurements for the indicated hole pattern?
Also, can anyone confirm that the chamfer is on the ID?
If anyone has a picture or two of this spacer, that sure would be great... Can anyone help? Thanks again, y'all.