I know that this seems like its been posted a thousand times , BUT, I changed the oil in my 1966 200 Mustang yesterday. The dipstick is over the mark by about a 1/2" inch above full. I placed 4-1/2 quarts of oil into the motor. I seen where specs say 4 quarts for the pan and a quart for the filter. How many quarts does it really hold. The dipstick is a little confusing. It reads like there is a quart too much with only 4-1/2 quarts installed after the motor has ran then set a while. Same reading.
oil capacity 200 I6
- Thread starter franko66
- Start date
Directly from the Ford Shop Manual
Oil Capacity (1) 170 and 200 Six: U.S. Measure 4.5 quarts/Imperial Measure 3.75 quarts
(1) Includes one U.S. quart required with oil filter replacement
Oil Capacity (1) 170 and 200 Six: U.S. Measure 4.5 quarts/Imperial Measure 3.75 quarts
(1) Includes one U.S. quart required with oil filter replacement
