Rebuild kit?

[jamerson84]

Well I'm trying to buy a rebuild kit for my 65 200 but I need to know some mesurements if any body knows these let me know it would help alot. I need
Main bearing size
rod bearing size
piston and piston ring size
I guess these mesurement would be for a stock 65 200.
Thanks again.

 

[Anonymous]

if you are rebuilding yourself when you have your block machined your machinist can mic. it down and let you know those measurements. you will need piston rings and piston heads to fit your machining. my block was already .030 over and the shop machined it to .040 over. I had to return my rings and crank bearings too. the rings I bought was for .030 over not .040 over and the crank was swapped so I needed different size crank bearings.

best to wait and see what your block gets machined to. also do you know if it has been machined before or are you guessing at it being stock?

 

[jamerson84]

No I don't know if it's been machined before I can't tell though.
When I take the block and head to the machine shop do I need to bring along anything else like the pistons or crank shaft? Or can they make all these mesurements without the internal components. Also will the machinist be able to tell it the block has been decked or not? Just thought I'd ask since this is my first time rebuilding. Thanks.