struttower almost ready [pic]

[Anonymous]

almost ready ,just the connector end to the monte carlo bar to make , and it wil ready ! i,m only thinking of cutting of the orginal tower brace from the shock towers ? when this is ready, next project wil the TCP suspension , i,m already into it ,gone weld next week the parts and hopefully end of the week a testfit !

 

[Asa]

it's looking beautiful Harrie, just gorgeous, keep up the good work
quick question, with all that nice shiny metal, maybe some similar shiny shock mounts for the tops of the towers? just a quick idea, don't know how much time, or fabrication it would take, but it could look good
hmmm..... maybe even incorporate it into the mounting plate for the other rods? so it's one piece

a few thoughts to muddy the waters
how is the website coming along?

once again, wonderful work

 

[Anonymous]

THX
this setup is for a standaard setup , i got otherplates laser cut with no hole,s in it for the shocks go trough , so a complete flat plate , because i,m doing the TCP setup !
but would be possible to make a struttower setup with a new desing shock mounths onto the strut set in 1 incorporate design !!!
nice idee , i gone draw 1 and post it later here !

new shock mounths stainles steel 4 M/M polish,t with the hole,s and lips on it for a struttowersetup !
maybe comming in 2 hights! because when doing the shelby drop ,the shock movemend wil be shorter ,get it ?so 1 in orginal hight and 1 making about 1.5CM higher ? i did see some pic there extend the towers

btw website, because i,m posting so much pic , i got not many MB left for setting up my website !
i,m thinking of using my friends home site , he,s not using it , it is comming free with the accound , [ 10 MB ] i think that wil do . 20 MB total for pic and homesite !

 

[Asa]

Harrie, for your hosting issues, try www.hpphoto.com i've got something like 145 jpeg files on there, and i'm only using about 95% of the space they gave me, plus you can always sign up for more accounts if you run out of space

 

[Anonymous]

thx for the offer gone try it , thx , btw here is your idee !!
gone cut it in 5 M/M stainles steel monday for trying !!

dont laugh ! i always make first paper models for trying and fitting !
like remember the young days , drawing ,cutting and paste models from paper !



seems a good idee , for me... 1 piece nice polish stainles steel that also do fine with the tower setup from stainles steel !!

 

[66Monterey]

Edelbrock makes front shocks specifically for the Shelbys. But I don't know if they are shorter, or just tuned firmer...